0x00: Check in Settings>System>Auto Maintain to ensure that the DVR is not set to reboot. 0x01: This one is the hardest one to diagnose. We recommend updating the firmware to the most Recent version, hard resetting the DVR, and ensuring the DVR is receiving consistent power. 0x02: Clear the log. Go to Information>Log and click Clear. The total amount of frames each camera need to be configured will be 7.5. Although 7.5 FPS is not something available in the DVR/NVR, then you will need to configure them at 7FPS each. Same principal will apply If you want to connect 16 cameras at 720p, then you will divide 240 (FPS) by 16 (Cameras to be connected to the HYBRID DVR/NVR). Device system time is not corresponding to computer time. Single click “Camera setting > Camera property > Configuration file management > Switch according to time” in the WEB interface, set time period according to the computer time. Synchronize the device time and current PC time. Device is leaking water. Network bandwidth is not enough; change a switcher with bigger bandwidth. Too many users logging in, and it is beyond the device code stream output capacity. Disconnect the network or restart the device repeatedly, see 1.1 for more details. IR effect is bad. Users didn’t use specified power supply, and failed to enable all the IR lights. Dịch Vụ Hỗ Trợ Vay Tiền Nhanh 1s.

dahua dvr not displaying